Panoramic Roof Fitting Guide

Step 1

Remove all the side trims and the rear headlining inc wiring loom to light, rear roof strut find edge were single skin is and drill two small holes a foot apart in middle this is your start line, on top of roof draw line across the two holes then find center of roof and draw your second line. then find middle of frame and mark with marker now place frame on roof line up frame with center line and edge of frame on strut line and draw around frame Make sure your hole is marked out is square, measure corner to corner. on a defender 90 roof goes length ways def 110 roof goes across roof if fitting double roof then you drill small hole both side of rear strut